Connectors - IRISO Electronics co.,ltd.

MENU

NEWS

ランドの検索結果(12件)

ランド

ランド ビア表面の周囲に施される「金属の島」状のもので、部品を半田実装する部分です。ビアの穴形状に併せて、円形や楕円形が典型的です。四角形状のSMT用のはんだパッド/フットプリントを総して、ランドと呼ぶこともあります。 […]

Brand statement

ブランド・ステートメント 一本のピンから始まったイリソ電子工業。総合コネクタメーカーとなった今日も、創業の気持ちを忘れないようにとの気持ちがこめられています。 情熱(Passion)と英知(Wisdom)を結集し、一人一 […]

コンプレッションターミナルについて

コンプレッションターミナルとは コンプレッションターミナルは、グランド端子、アースターミナル、オンボードコンタクトやスプリング端子等様々な呼び方で呼ばれる製品で、当社では「コンプレッションターミナル」に呼称を統一していま […]

Reasons for the difference in connector performance between single-ended transmission and differential transmission

Why is there a difference in connector performance between single-ended transmission and differential transmission? Our website describes the data rates supported by Board to Board Connectors and FPC / FFC Connectors. Both of them are based on the “differential 100Ω system” […]

Options to improve connector reliability

2-point contact connector What is a 2-point contact? Two-point (or multi-point) contacts are available as an option to increase the connection reliability of connectors, and various structures have been devised. As the name suggests, it is a connector that has “two points” of contact for one connection, and “either […]

IRISO supporting 5G/high-speed communication

The increase in the amount of information against the background of IRISO 5G, etc., which supports 5G/high-speed communication, has spurred the increase in high-speed transmission of electrical connections, and the existence of connectors in signal integrity has become even more important. IRISO, "Solution from deterioration of high-speed signal substrates […]

ホットプラグ/活線挿抜

ホットプラグ/活線挿抜 機器が通電状態にある状況で接続を行われる事です。その対応として、コネクタとしては端子の長さを変えることなどによって、グランド接続→電源→信号等と挿入時に接触する順番を制御する方法(メーティングシー […]

同軸コネクタ(Coaxial cable)

同軸コネクタ(Coaxial cable) 名前の通り同軸上の円柱が重なった形のコネクタで、基本構造は中心の円柱が信号コンタクトとなり、外側の円柱がグランドまたは信号の帰路として使われます。構造上電界が閉じ安定するために […]

静電シールド

静電シールド 主として金属で構成される部品で、製品を覆う形で配置されます。同部品に信号伝送部と逆方向の電流を誘導させる事で電磁界をキャンセルします。最適な効果を発揮するためには、安定したグランドに低いインピーダンスで接続 […]

EMC/EMI/EMS

EMC/EMI/EMS EMIはElectro Magnetic Interferenceである電子機器や部品が動作時に発生させるノイズでエミッションとも呼ばれます。EMSはElectromagnetic Suscept […]

1 2