"Resistive Loss" and "Dielectric Loss" In the high-speed transmission area, why do signals "attenuate" when they pass through transmission lines? This time, among the attenuation of the signal, it depends on the material around the transmission line, such as loss due to electrical resistance and dielectric loss […]
Resistance loss Energy loss when current flows through a resistor, I^2 x R. See also voltage drop. Search the site for content containing this term
Rated current and current shunt of connectors Connectors have a stipulation called rated current. In the case of our company, the rated current is "the current value that raises 30°C when all poles are energized." The temperature rise during energization is included in the rated temperature (allowable temperature) of the product, so the […]
What is a High-speed transmission Connector? IRISO' high-High-speed transmission Connector are a product group that can support high-speed transmission while maintaining the conventional superior functions such as Floating structure mechanism and Auto I-Lock structure. Even terminals with complex structures have stable impedance plots […]
High-speed jumper solutions IRISO' high-speed jumper solutions separate high-speed signals from the board via FPC/FFC, contributing to customer design flexibility and cost optimization. Development background It will reach 25 Gbps […]
電圧降下 コネクタ、基板の線路および電線などの導電物を電気信号が通過したのちに低くなる現象です。導電物は電気抵抗を有していますので、電流(I)が導電物を流れる時その抵抗(R)に対して電圧(V)はI×Rだけ低くなります(オ […]
表皮効果(ひょうひこうか) 電気信号が高周波に行くにしたがって表面側に集中していく現象で、これによって高周波では導体の有効断面積が小さくなり抵抗損失が大きくなります。またこの表皮効果が進むと、抵抗損失は導体のオリジナルの […]
Insertion Loss/Insertion Loss Especially for high frequency signals, it becomes smaller when the input signal is output via the transmission line. The parameter that indicates the degree of this decrease is called insertion loss/insertion loss. The ratio of the output signal to the input signal […]