IRISO supports 5G/high-speed communications

The increase in data volume due to 5G and other trends is spurring faster transmission speeds in electrical connections, making connectors even more important in terms of signal integrity.
IRISO continues to take on challenges such as "eliminating degradation of high-speed signals on PCBs," "combining mechanical mechanisms such as Floating structure with high-speed transmission," and "adding ground connections in limited spaces," and offers solutions to customers' high-speed transmission problems in a variety of situations.
Here you can see some of the products that have been optimally designed through numerous field evaluations and simulations.
 

Exhibited products

11501 series

This 0.5mm pitch NON-ZIF RA type FFC connector is compatible with shielded FFCs, enabling high-speed digital signal transmission. The shielding provides EMC protection. The optimized contact structure supports transmission speeds of over 20.0Gbps depending on the FFC selected (a representative reference value defined by the company). Impedance matching: 100Ω differential. Auto I-Lock structure prevents disconnection yet makes it easy to remove. It features a locking mechanism that locks the FFC card as soon as it is inserted. It also contributes to Assembly automation by being compatible with IRISO Robot Friendly connectors.
 

11501S series details page

11600 series

This 0.5mm pitch NON-ZIF RA type FFC connector is compatible with shielded FFCs, enabling high-speed digital signal transmission. Its shielding provides EMC protection. The optimized contact structure supports transmission speeds of over 20Gbps depending on the FFC selected (a representative reference value defined by the company). Impedance matching: differential 100Ω. Auto I-Lock structure prevents disconnection yet makes removal easy. It features a locking mechanism that locks the FFC card as soon as it is inserted. It also contributes to Assembly automation by being compatible with IRISO Robot Friendly connectors.
 

11600S series details page

10143 series

This connector is ideal for connecting ADAS and ECU applications, which are necessary for autonomous driving.
Board to Board Connector type "hybrid" concept combines high-speed transmission of 25Gbps * with a Floating structure with an unprecedented amount Floating (±0.8mm Floating the X and Y directions).Power terminals that also function as fixing brackets are mounted on both ends of the connector, allowing for a smaller connector with fewer contacts and a more compact design.
*Measured according to the OIF CEI-28G-SR standard
 

10143 series details page

10144 series

Board to Board Connector "hybrid" concept that achieves both Floating structure with an unprecedented amount Floating (X and Y directions ±0.8mm Floating). Power terminals that also function as fixing brackets are installed on both ends of the connector, achieving small-pole and compact connectors. 10143 series right-angle (vertical) connection type.
 

10126 series

0.40mm pitch, Floating structure type Stacking connection (ST/ST) Board to Board Connector connector for high-speed transmission of digital signals. Floating（The Floating structure structure allows 0.4 mm Floating to X Y direction and 0.3 mm effective Mating length in the Z-direction. low profile Space-saving design with high-speed transmission capability of 8.0Gbps (typical reference value based on in-house definition). Impedance matching: Differential 100 Ω. Absorbs optical axis misalignment when installing into a module board of an in-vehicle camera, greatly improving reliability.
 

10126B series details page

10126S series details page

16124 series

Compression Terminal with a recommended compression range of 1.0 to 0.8 mm. Detachment concept utilizes the contact spring pressure.
 

16124T series details page

 

Product Inquiries